• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards will fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is substantial, you may want to use security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you are happy with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles can also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. You'll first need to close the window and do an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease It could be hinges that are at the fault. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain manner or because of improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to offer suggestions.

It is also crucial to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear can become misaligned, this can cause gaps to develop where the sash joins the frame. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may be misaligned. It is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it is cheaper to replace them than to repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.